Shift4 / Finaro / Credorax

Creditcard

The following parameters for the Connector need to be configured (see PCI Vault Configuration - Creditcard Finaro):

1. Check option to Use Test Endpoint
2. Fill in the mandatory Merchant ID
3. Fill in the optional Sub-Merchant ID
4. Fill in the mandatory Authentication Cipher
5. Fill in the optional Descriptor Merchant Name
6. Enable the option Dynamic Descriptor Enabled
7. Check the option Use Credorax MPI
8. Fill in the optional MPI Merchant ID
9. Fill in the optional MPI Merchant Name
10. Fill in the optional MPI Password
11. Select the MPI Host — Test, Live, Live Fallback,
12. Check the option Use Credorax 3D-Secure 2.0
13. Fill in the optional Default value for Multiple Capture tag¹
14. Select the Authorization Type - 1, 2; 1 (default) for final authorisation, 2 for pre-authorisation

PCI Vault Configuration - Creditcard Finaro

Footnotes

1. Multiple Capture tag

   Indicates the number of expected Captures

   • Only supported in Card-not-Present transactions
   • Default value is 1
   • Max value is 98
   • Min value is 2
   ↩